Nantong Mingtai machine tool introduction of three roller bending machine better operation method?

Better operation method of three-roller plate rolling machine:

1, three roller bending machine must be responsible for management.

2, the operator must be familiar with the structure and performance of the three-roller bending machine and the use of the method, agreed by the responsible manager, can be operated.

3, before starting, carefully check whether the safety device is in good condition.

4, when operating, hands and feet are strictly prohibited on the roller and transmission parts and workpiece.

5, work interruption, should be the clutch to neutral.

6, multi-person collaborative operation must have special command.

7, Overload is strictly prohibited.

8, The lifting and reversing of the upper roller, the dumping reset of the bearing and the balance of the upper roller, must be carried out after the main drive stops.

9, It is forbidden to pile up workpieces and sundries in the work site, and keep the machine tools and the site clean at all times.

10,the operation is finished, should cut off the power supply, and lock the power box.